...
Culligan IWEvo

Flow rate 5 – 40 m3/hr on standard range. The Culligan IWEvo series has been designed to meet the needs of the most demanding industrial and municipal applications. Available in 7 models covering flow requirements of 5 to 40m3/hr (22 to 176 GPM) and capable of treating salinities up to 3000ppm of TDS.

Pdf

...
Culligan IWEvo
Flow rate 5 – 40 m3/hr on standard range. The Culligan IWEvo series has been designed to meet the needs of the most demanding industrial and municipal applications. Available in 7 models covering flow requirements of 5 to 40m3/hr (22 to 176 GPM) and capable of treating salinities up to 3000ppm of TDS.
PDF
...
Culligan IWEvo
Flow rate 5 – 40 m3/hr on standard range. The Culligan IWEvo series has been designed to meet the needs of the most demanding industrial and municipal applications. Available in 7 models covering flow requirements of 5 to 40m3/hr (22 to 176 GPM) and capable of treating salinities up to 3000ppm of TDS.
მეტის ნახვა
...
SW Evo Reverse Osmosis
Flow rates up to 60 m3/hr on standard range. Designed specifically for the desalination of sea water, SW RO unit is able to treat water with up to 42,000 ppm of salinity. The unit is manufactured using fully corrosion resistant materials such as duplex stainless steel and is skid mounted to allow ease of installation either on or offshore.
PDF
...
G2 Reverse Osmosis
G2 makes it simple to manage your water for drinking and industrial processes. G2 is a painted steel skidded system sized to serve many medium sized applications that require high quality reverse osmosis water.It is designed with the flexibility to closely match your treatment requirements from 3 to 18 gallons per minute (4,000 to 25,000 gallons per day).
PDF
...
G1 Reverse Osmosis
The G1 Reverse Osmosis System is a compact RO system designed for high-performance commercial and light industrial applications. Equipped with digital flow meter for product-discharge, pressure gauges for pressure control in and out, online instrumentation for produced water quality and recovery ratios and high efficiency reverse osmosis membranes.
PDF
...
E1 Reverse Osmosis
Flow rate 0.04 – 0.35 m3/hr The E1 Reverse Osmosis system helps you reduce maintenance costs by reducing contaminants from your water that affect taste and can clog equipment. Control your installation costs by using a system configured for your unique needs. Keep your operating costs low with an easy-to-use electronic controller.
PDF
...
M1 Reverse Osmosis
Flow rate 0.04 – 0.35 m3/hr The M1 Reverse Osmosis System, with enhanced features, is designed for commercial applications that require a maximum flow rate of 350 liters / h. The M1 is equipped with a pre-treatment sediment filter and flow meters for the control of the inlet pressure and output. The unit is controlled via the Culligan CP control panel.
PDF
...
Aqua-Cleer Advanced
Equipment for the treatment of drinking water. The Culligan Aqua-cleer Advanced is a reverse osmosis device offering the most complete solution for high quality refined water. The osmosis membranes R.O. retain most of the salts present in the water, eliminating unwanted substances
PDF
...
AquaCleer SB 200 Reverse Osmosis
Flow rate 1.5 m3/hr soft water – 0.2 RO water m3/hr. AquaCleer SB 200 is a complete water treatment system which includes reverse osmosis system as well as pre-treatment. Ideal for installations such as food service that require softened water for some applications such as dishwashers, and reverse osmosis for beverage preparation.
PDF
...
Culligan MFP Reverse Osmosis
Flow rate 0.4 – 3.6 m3/hr The MFP RO unit is ideal for drinking water and industrial processes in any location. The MFP RO is mounted within a steel frame with no welded parts, guaranteed against corrosion. The system is controlled via an electronic control panel which monitors all operating conditions and displays flow, conductivity and other parameters.
PDF
...
RO2 MD BiO E Hemodialysis Water Treatment
For flows of up to 3600 l/h, the RO2 Bi-Osmosis system is ideal for treating water for whole-ward haemoldialysis applications. Water passes through 2 reverse osmosis systems to produce the highest quality water, but in the unlikely event of a problem the system will automatically move to single pass treatment thereby ensuring patient safety at all times
PDF
...
RO2 MD BiO THERMO Dialysis Water Treatment
Flows up to 3200 L/h The RO2 Thermo is Culligan’s latest medical device certified RO for producing safe high quality water for use in hemodialysis. In addition to a fail-safe PLC controlled 2-pass RO system the RO2 Thermo also uses an in-built heat sanitization system to destroy bacteria and viruses reducing or even eliminating the need to use sanitizing chemicals.
PDF
...
SDS RO
Single Dialysis System Flows up to 80 L/h The SDS (Single Dialysis System) produces up to 80 l/h of reverse osmosis quality water for use in haemodialysis. The unit is ideal for applications such as dialysis in a patient’s home, use by emergency services, dialysis in acute cases and for transplant patients. Designed to be compact and easy to use, the equipment is on wheels to aid with mobility.
PDF
...
Dual Box
The system includes full pre-treatment (filtration, softening, dechlorination) and the Culligan Bi-osmosis technology. This complete treatment system is automatically controlled via touch screen PLC for ease of use. To aid with simple installation the units are contained within corrosion resistant steel cabinets, and simply require power, water inlet, outlet and drainage connections.
PDF
...
IWEvo Reverse Osmosis
Flow rate 5 – 40 m3/hr on standard range. The Culligan IWEvo series has been designed to meet the needs of the most demanding industrial and municipal applications. Available in 7 models covering flow requirements of 5 to 40m3/hr (22 to 176 GPM) and capable of treating salinities up to 3000ppm of TDS.
PDF